Are you concerned because there is mold on the walls in your warehouse? If you can't pinpoint why the mold is growing, the problem might be on the inside of the wall cavities. The plumbing lines inside of the walls are possibly in need of being inspected by a plumber. Water can be leaking out of the pipes and causing mold to grow on the walls. This article covers a few of the things that might need to be done to get rid of the mold growth problem in your warehouse.
1. Performing Leak Detection
One of the services that a plumber. such as Towers Murray Plumbing, can provide is finding out if there are any leaks in the plumbing lines. There will not be a need for the plumber to open up the walls to inspect the pipes. He or she can use leak detection equipment to discover any leaks that may be present behind the walls. The walls will only be opened up if the equipment detects a possible leak. Basically, the plumber will use the equipment for listening to specific types of sounds.
2. Repairing the Plumbing Lines
If a leak is detected in the plumbing lines, a plumber will cut a hole in the drywall to access the problematic pipes. He or she will then proceed with determining what might have caused the leak to occur. For example, if your pipes tend to freeze up when the weather is cold, it can cause pipes to burst open. A high level of condensation in your warehouse can also damage the pipes to the extent of developing cracks. Repairing the pipes might only involve the plumber sealing them up, but severe damage might require that the pipes are replaced.
3. Installing Insulation on the Pipes
Once your plumbing lines have been repaired, it is wise for you to try to prevent leaks from happening again. Getting the pipes insulated is a great form of preventative maintenance. A plumber can install insulation around the pipes before he or she patches up the drywall after making repairs. You will just have to choose the type of pipe insulation that you want installed, as there are many types for you to choose from. For example, you can opt for insulation that completely covers the exterior of the pipes by wrapping around them. The insulation will be able to protect the pipes against freezing weather, condensation, and high humidity levels.